All Fireplace Doors
Compare fireplace doors by starting price, then explore the fit, finish and glass options for your favorites.
Filmed at Design Specialties
Fireplace doors, lit, in real rooms.
0:10
Start here
Which fireplace do you have?
Brick and stone take a different door than a factory-built metal firebox. One look inside is usually enough.
Masonry vs prefab, explained
Showing 24 of 71 all fireplace doors - low to high
Good to know
Questions people ask before they order
How do I know which fireplace door I need?
Start by identifying whether your fireplace is masonry (brick, stone, mortar joints) or prefab (a metal box with refractory panels bolted in). Masonry takes overlap-fit doors that cover the brick face; prefab needs an exact-match door for your make and model. Our photo tool identifies the type from a picture of your fireplace.
What is the difference between custom and standard-size doors?
Standard-size doors come in fixed sizes and ship in a few days. Custom doors are built to your exact opening, to the eighth of an inch, and run longer. Most masonry openings need custom, because they are rarely square.
How long does a fireplace door take to ship?
Quick-ship HearthCraft and Design Specialties Columbia doors leave the warehouse in 2–6 business days. Custom Design Specialties doors run 14–21 business days. Premium Avalon, ForgeLine and plated finishes run 4–5 weeks. Freight and crating are included in the continental US.
Are fireplace doors covered under warranty?
Doors carry a 5-year workmanship warranty on the frame, 2 years on the finish and 2 years on hardware; glass and mesh carry 1 year. Breakage from impact and finish wear from abrasive cleaning are excluded. Full terms are on the warranty page.
Do glass doors save energy?
When the fireplace is cold, closed glass doors stop room air from being pulled up the chimney by the natural draft. During a burn, doors should stay open for radiant heat and to feed combustion air.
Can I install a fireplace door myself?
Every door ships with a hardware pack, instructions and a template. Masonry overlap doors need a hammer drill with a quarter-inch masonry bit; prefab doors anchor to the existing factory mounting points. Plan on 30–60 minutes. The installation guide walks through both fit types.
How do I measure my fireplace for glass doors?
Measure the opening width at the top, the middle and the bottom, and the height at the left, the centre and the right — to the nearest eighth of an inch with a steel tape. Use the smallest width and the smallest height for an inside fit, and note any lintel bar across the top. The measuring guide walks through it, and every custom order gets an Expert Fit Review by a person before anything is cut.
Should the glass be open or closed while the fire burns?
With a wood fire: glass open, mesh closed. Standard tempered glass is not rated for direct sustained flame. Close the glass once the fire has died down, and whenever the fireplace is idle, to stop the draft. Ceramic glass is the exception — the full answer is here.
What if I measure wrong?
You are covered two ways. Verify your measurements with us — a short video call, or photos with the tape in frame — and the fit is guaranteed: a wrong size on a verified order is our problem. If you measured on your own and a number turns out wrong, talk to us and we will work out a remake at our cost. Terms are on the Perfect Fit Guarantee page.
Do you make arched doors?
Yes. Arched doors are one of the things we are known for: measured by width, side height and centre peak, with a free template kit for full-arch curves, and built to your masonry opening in the USA.
- Expert Fit Review on every custom orderGet help with measurements and product options.
- Shipping informationSee delivery options and charges in our shipping policy.
- Family-owned since 2014Call (949) 619-7824 for help with your project.
- 4.7 from 711 verified reviewsCollected by Loox from real orders.